Product reference photographs. Confirm grade, finish and supply specification with your enquiry.
Stainless steel plate & coil
Stainless steel plate & sheet
Stainless steel plates and sheets in grade-specific finishes and delivery conditions. Compare the grades below by application, thickness, surface and inspection requirements.
- Product form
- Plate / sheet
- Surface / finish
- Stainless steel
- Grade / standard
- 304, 304L, 316L, 201, 2205, 2507 and additional grades
- Thickness
- 0.3mm-200mm
- Width
- 40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc.
Plan your order
Material & processing
Specify dimensions and tolerances. Include the grade or describe your intended use if it is not yet selected.
Quantity & timing
Share your required tonnage and delivery date. Ask for stock availability, minimum order quantity and the dispatch schedule for your exact specification.
Packing & documents
Include destination, handling limits and required inspection documents so they can be reviewed with the material quotation.
Product details
Stainless steel sheet and plate cut to size should be ordered by exact grade and surface finish. State thickness, width and finished length, then identify the visible face, finish direction and protective film requirements where relevant. Select the grade against the service conditions and purchasing specification, rather than the photograph or finish alone.
Stainless steel plate & sheet for corrosion-resistant equipment, food processing, architectural panels and industrial fabrication. Select the grade, dimensions, finish and inspection requirements for your order.
Grade selection
Select the exact grade and purchasing standard from the tables below.
Delivery condition
Specify surface finish, heat treatment and dimensional tolerances.
Inspection & supply
Agree test documentation, packing and shipment requirements.
Typical application
Corrosion-resistant equipment, food processing, architectural panels and industrial fabrication.
Corrosion-resistant equipment, food processing, architectural panels and industrial fabrication.
Explore applicationsProduct specifications
| Product form | Plate / sheet |
|---|---|
| Grade / standard | 304, 304L, 316L, 201, 2205, 2507 and additional grades |
| Type | Plate |
| Thickness | 0.3mm-200mm |
| Width | 40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc. |
| Surface | 2B, BA, No.1, No.4, hairline or polished finish as ordered |
| Production Technology | Hot Rolling, Cold Rolling |
| Standard | ASTM A240/A240M, EN 10088-2 or the specified product standard |
| Delivery condition | Annealed / solution treated as required by the selected grade |
| Edge processing | Mill edge, trimmed edge or slit edge |
| Cut length | 2,000 / 2,438 / 3,000 / 5,800 / 6,000 / 12,000 mm or as ordered |
| Dimensional tolerances | To the ordered product standard and agreed drawing |
| Inspection | Material identification, dimensions, surface and specified test report |
| Packaging | Protective wrapping, edge protection and steel strapping as agreed |
Dimensions and finishes depend on the selected grade and processing route; not every size and finish combination is available. The technical tables describe the stated grades and test conditions. Your quotation should identify the exact supply specification and applicable standard.
Grade-specific technical data
Select the exact grade to view its composition, mechanical properties and test conditions. Grades and standards are not interchangeable; confirm the ordered edition and delivery condition. These reference tables are not a live stock list.
304
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.08 | ≤1.0 | ≤ 2.0 | 18.0～20.0 | 8.0～10.5 | ≤ 0.03 | ≤ 0.035 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥ 520 | ≥ 205 | ≥ 40 | ≤ 187HB ;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical properties
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 8.03 | 193 | 16.9 | 16.2 | 72 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
304L
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.03 | ≤1.0 | ≤ 2.0 | 18.0～20.0 | 8.0～12.0 | ≤ 0.03 | ≤ 0.035 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥ 520 | ≥ 205 | ≥ 40 | ≤ 187HB ;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 8.03 | 193 | 16.9 | 16.2 | 72 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
316
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P | Mo |
|---|---|---|---|---|---|---|---|
| ≤ 0.03 | ≤ 0.75 | ≤ 2.0 | 16.0～18.0 | 10.0～14.0 | ≤ 0.03 | ≤ 0.045 | 2.0～3.0 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥480 | ≥177 | ≥ 40 | ≤ 187HB;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.99 | 193 | 16.0 | 16.2 | 74 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
316L
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P | Mo |
|---|---|---|---|---|---|---|---|
| ≤ 0.03 | ≤1.0 | ≤ 2.0 | 16.0～18.0 | 10.0～14.0 | ≤ 0.03 | ≤ 0.045 | 2.0～3.0 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥480 | ≥177 | ≥ 40 | ≤ 187HB;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.99 | 193 | 16.0 | 16.2 | 74 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
201
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.15 | ≤ 0.75 | 5.50~7.50 | 16.00~18.00 | 3.50~5.50 | ≤ 0.03 | ≤ 0.06 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥ 520 | ≥ 275 | ≥55-60 | ≤183HB；≤ 100 HRB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(μohm.in) |
|---|---|---|---|---|
| 7.8 | 197 | 15.7 | 16.2 | 27 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
430
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.12 | ≤1.0 | ≤1.0 | 16.0～18.0 | ≤0.75 | ≤ 0.03 | ≤ 0.04 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥634 | ≥440 | ≥20 | Annealing≤ 223HB; quenching and tempering ≥ 192HB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.70 | 200 | 10.4 | 23.9 | 360 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
2205
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | Mo | S | P |
|---|---|---|---|---|---|---|---|
| ≤ 0.03 | ≤1.0 | ≤ 2.0 | 21.0～23.0 | 4.5～6.5 | 2.5～3.5 | ≤ 0.02 | ≤ 0.03 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥620 | ≥450 | ≥25 | ≤ 293HB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.88 | 190 | 13.7 | 19.0 | 80 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
2507
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | Mo | S | P |
|---|---|---|---|---|---|---|---|
| ≤ 0.03 | ≤ 0.8 | ≤ 1.2 | 24.0～26.0 | 6.0～8.0 | 3.0～5.0 | ≤ 0.02 | ≤ 0.035 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥795 | ≥550 | ≥15 | ≤ 310HB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.75 | 200 | 13.0 | 17.0 | 80 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
202
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.15 | ≤1.0 | 7.5~10.0 | 17.00~19.00 | 4.00~6.00 | ≤ 0.03 | ≤ 0.06 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥ 520 | ≥ 275 | ≥40-50 | ≤207HB；≤ 95 HRB;≤218HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(μohm.in) |
|---|---|---|---|---|
| 7.93 | 203 | 17.5 | 16.3 | 22 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
254SMO
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | Mo | S | P |
|---|---|---|---|---|---|---|---|
| ≤ 0.02 | ≤ 0.8 | ≤1.0 | 19.5~20.5 | 17.5~18.5 | 6.0~6.5 | ≤ 0.01 | ≤ 0.03 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥680 | ≥300 | ≥45 | ≤ 180HRB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 8.0 | 195 | 16.0 | 14.0 | 85 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
301
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.15 | ≤ 1.0 | ≤ 2.0 | 16.0～18.0 | 6.0～8.0 | ≤ 0.03 | ≤ 0.045 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥ 520 | ≥ 205 | ≥ 40 | ≤ 187HB ;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(μohm.in) |
|---|---|---|---|---|
| 7.88 | 193 | 16.9 | 16.2 | 27.4 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
302
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.15 | ≤1.0 | ≤ 2.0 | 17.0～19.0 | 8.0～10.0 | ≤ 0.03 | ≤ 0.035 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥ 520 | ≥ 205 | ≥ 40 | ≤ 187HB ;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(μohm.in) |
|---|---|---|---|---|
| 7.93 | 200 | 17.6 | 16.3 | 27.4 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
303
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.15 | ≤1.0 | ≤ 2.0 | 17.0～19.0 | 8.0～10.0 | ≥ 0.15 | ≤ 0.20 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥ 520 | ≥ 205 | ≥ 40 | ≤ 187HB ;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(10-6*Ω.m) |
|---|---|---|---|---|
| 8.03 | 193 | 17.3 | 16.3 | 0.72 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
305
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.04 | ≤ 0.75 | ≤ 2.0 | 17.0～19.0 | 10.5～13.0 | ≤ 0.03 | ≤ 0.045 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥515 | ≥205 | ≥35 | ≤ 187HB;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.99 | 193 | 17.3 | 16.2 | 72 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
309-309S
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | 22.0～24.0 | 12.0～15.0 | ≤ 0.03 | ≤ 0.045 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥515 | ≥205 | ≥35 | ≤ 217HB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.98 | 200 | 14.9 | 15.6 | 78 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
310S
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.08 | ≤1.0 | ≤ 2.0 | 24.0～26.0 | 19.0～22.0 | ≤ 0.03 | ≤ 0.045 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥520 | ≥205 | ≥40 | ≤ 217HB;≤ 95HRB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 9.01 | 200 | 14.4 | 13.8 | 94 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
317L
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P | Mo |
|---|---|---|---|---|---|---|---|
| ≤ 0.035 | ≤ 0.75 | ≤ 2.0 | 18.0～20.0 | 11.0～15.0 | ≤ 0.03 | ≤ 0.04 | 3.0～4.0 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥480 | ≥177 | ≥ 40 | ≤ 187HB;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.99 | 193 | 16.0 | 16.2 | 79 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
321
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | 17.0～19.0 | 9.0～12.0 | ≤ 0.03 | ≤ 0.045 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥520 | ≥205 | ≥ 40 | ≤ 187HB;≤ 90HRB;≤ 200HV |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.92 | 193 | 16.6 | 16.0 | 72 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
330
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.08 | 1.0～1.5 | ≤ 2.0 | 18.0～22.0 | 34.0～37.0 | ≤ 0.03 | ≤ 0.03 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥552 | ≥207 | ≥ 40 | ≤ 85HRB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 8.00 | 197 | 14.4 | 12.5 | 101.7 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
347
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | 18.0～20.0 | 9.0～13.0 | ≤ 0.03 | ≤ 0.04 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥515 | ≥205 | ≥ 40 | ≤ 201HB;≤ 95HRB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.97 | 193 | 16.0 | 16.3 | 72 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
403
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.15 | ≤ 0.5 | ≤1.0 | 11.5～13.0 | ≥ 0.6 | ≤ 0.03 | ≤ 0.04 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥485 | ≥290 | ≥25 | ≤ 98HRB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(10-6 Ω.m) |
|---|---|---|---|---|
| 7.80 | 190 | 9.9 | 21.5 | 740 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
405
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.08 | ≤1.0 | ≤1.0 | 11.5～14.5 | ≤ 0.5 | ≤ 0.03 | ≤ 0.04 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥485 | ≥275 | ≥25 | ≤ 160HBW |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(Ω.mm2/m) |
|---|---|---|---|---|
| 7.80 | 200 | 10.8 | 27.0 | 0.6 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
409
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.08 | ≤1.0 | ≤1.0 | 10.5～11.75 | ≤ 0.5 | ≤ 0.045 | ≤ 0.045 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥360 | ≥175 | ≥25 | ≤ 162HBW |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(NΩ.m) |
|---|---|---|---|---|
| 7.80 | 200 | 11.0 | 25.8 | 600 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
410
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.15 | ≤1.0 | ≤1.0 | 11.5～13.5 | ≤ 0.5 | ≤ 0.03 | ≤ 0.04 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥450 | ≥205 | ≥20 | ≤ 201HB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.74 | 200 | 9.9 | 24.9 | 570 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
416
Chemical composition (% by mass)
| C | Si | Mn | Cr | S | P | |
|---|---|---|---|---|---|---|
| ≤ 0.15 | ≤1.0 | ≤ 1.25 | 12.0～14.0 | ≤ 0.15 | ≤ 0.06 | |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥540 | ≥275 | ≥20 | ≤ 201HB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(NΩ.m) |
|---|---|---|---|---|
| 7.80 | 200 | 9.9 | 24.9 | 570 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
420
Chemical composition (% by mass)
| C | Si | Mn | Cr | S | P |
|---|---|---|---|---|---|
| ≤ 0.15 | ≤1.0 | ≤1.0 | 12.0～14.0 | ≤ 0.03 | ≤ 0.04 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥634 | ≥440 | ≥20 | Annealing≤ 223HB; quenching and tempering ≥ 192HB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.74 | 200 | 10.2 | 24.9 | 55 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
439
Chemical composition (% by mass)
| C | Si | Mn | Cr | S | P | |
|---|---|---|---|---|---|---|
| ≤ 0.03 | ≤1.0 | ≤1.0 | 17.0～19.0 | ≤ 0.03 | ≤ 0.04 | |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥415 | ≥205 | ≥22 | ≤ 89HRB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.60 | 210 | 10.2 | 24.2 | 63 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
440C
Chemical composition (% by mass)
| C | Si | Mn | Cr | S | P |
|---|---|---|---|---|---|
| 0.95～1.20 | ≤1.0 | ≤1.0 | 16.0～18.0 | ≤ 0.03 | ≤ 0.04 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥560 | ≥205 | ≥18 | ≤250HB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 7.60 | 200 | 10.1 | 24.2 | 360 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
444
Chemical composition (% by mass)
| C | Si | Mn | Cr | Mo | S | P |
|---|---|---|---|---|---|---|
| ≤ 0.025 | ≤ 0.6 | ≤1.0 | 17.5～19.5 | 1.75～2.50 | ≤ 0.03 | ≤ 0.04 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥414 | ≥276 | ≥22 | ≤ 90HRB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(Ω.mm2/m) |
|---|---|---|---|---|
| 7.80 | 200 | 10.0 | 26.8 | 0.6 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
904L
Chemical composition (% by mass)
| C | Si | Mn | Cr | Ni | Mo | S | P |
|---|---|---|---|---|---|---|---|
| ≤ 0.02 | ≤1.0 | ≤ 2.0 | 19.0～23.0 | 23.0～28.0 | 4.0～5.0 | ≤ 0.035 | ≤ 0.045 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Mechanical Properties
| Tensile Strength Kb (MPa) | Yield Strength σ0.2 (MPa) | Elongation D5 (%) | Hardness |
|---|---|---|---|
| ≥490 | ≥220 | ≥35 | ≤ 90HRB |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
Physical Performance
| Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(µΩ·cm) |
|---|---|---|---|---|
| 8.0 | 195 | 15.5 | 12.0 | 94 |
Product-matched supplier reference. Heat treatment, thickness and test orientation must match the purchase specification.
316Ti / EN 1.4571
1.4571 / 316Ti — EN flat-product chemical composition
| C max. % | Si max. % | Mn max. % | P max. % | S max. % | Cr % | Ni % | Mo % | Ti % |
|---|---|---|---|---|---|---|---|---|
| .08 | 1.00 | 2.00 | .045 | .015 | 16.50–18.50 | 10.50–13.50 | 2.00–2.50 | 5 × C to 0.70 |
EN 1.4571 flat-product basis. For ASTM S31635 orders, specify ASTM chemistry and testing separately.
1.4571 — annealed flat-product mechanical properties
| Product form | Thickness max. (mm) | Rp0.2 min. (MPa) | Rp1.0 min. (MPa) | Tensile (MPa) | Transverse A min. (%) |
|---|---|---|---|---|---|
| Cold-rolled strip/sheet | 8 | 240 | 270 | 540–690 | 40 |
| Hot-rolled strip/sheet | 12 | 220 | 260 | 540–690 | 40 |
| Hot-rolled plate | 75 | 220 | 260 | 520–670 | 40 |
Room-temperature, annealed condition. Values and thickness limits follow the stated EN flat-product data; they do not cover bar or tube.
1.4571 — physical properties
| Property | Value |
|---|---|
| Density at 20°C | 8.0 g/cm³ |
| Elastic modulus at 20 / 200 / 400 / 500°C | 200 / 186 / 172 / 165 GPa |
| Thermal conductivity at 20°C | 15 W/(m·K) |
| Specific heat at 20°C | 500 J/(kg·K) |
| Electrical resistivity at 20°C | 0.75 Ω·mm²/m |
| Mean thermal expansion, 20–100 / 200 / 300 / 400 / 500°C | 16.5 / 17.5 / 18.0 / 18.5 / 19.0 ×10⁻⁶/K |
Typical physical values, not batch acceptance limits.
Surface & processing requirements
Include the downstream process in your enquiry so that the material, dimensions and surface can be reviewed together.
| Cut-to-size requirements | Final length and width, cutting method and edge condition. |
|---|---|
| Forming / fabrication | Describe the downstream forming, pressing, profiling or fabrication operation. |
| Finishing requirements | State whether material will be painted, coated or otherwise finished after delivery. |
| Plate / sheet handling | Confirm lifting method, stack height and protection of edges and surfaces. |
Production & processing
Define the material and the downstream process together. Cutting, slitting or finishing requirements should form part of the order specification.
Material review
Grade, dimensions and surface requirements are checked against the enquiry.
Processing scope
Agree cutting, slitting or forming requirements and the finished product tolerances.
Order inspection
Define acceptance criteria, identification and the requested documentation.
Stock & warehouse
Warehouse photographs illustrate storage and handling. For a current stock check, send the grade, dimensions and tonnage; ask for the available quantity and order-specific material photographs before purchase.
Quality inspection & documentation
Agree the acceptance criteria and required documents before confirming your order.
- Material identificationGrade, standard and requested test documentation.
- Dimensions & surfaceThickness, width, finish and agreed tolerances.
- Order documentsProduct identification, packing list and inspection scope.
Packaging & shipment
Tell us how the material will be transported, unloaded and stored. Specify moisture protection, edge protection, package weight and destination with your enquiry.
| Protection | Moisture barrier, edge protection and surface protection as agreed. |
|---|---|
| Unit weight | Specify the coil or bundle weight for your unloading equipment. |
| Identification | Product, grade, dimensions and order reference on the agreed packing list. |
| Delivery | Confirm destination, transport method and delivery terms in the quotation. |
Material test reports & order documents
Use the document types below to define your quality requirements. Ask Alex or Anna which documents apply to the selected material; document type and inspection scope should be agreed before order confirmation.
| Material test report | Heat or coil number, ordered grade, chemical composition and mechanical test results. |
|---|---|
| Inspection document | Specify the required EN 10204 document type and inspection scope in the enquiry. |
| Conformity documents | Request an original copy showing the issuing body, holder, number, applicable scope and validity. |
Frequently asked questions
What should I specify for stainless steel sheet surface finish?
Give the required finish designation, visible side and direction of any directional finish. Include protective film requirements and appearance acceptance criteria where relevant. Confirm the finish together with the exact grade, thickness and manufacturing route; a finish name alone does not identify the material.
Can I choose between 304 and 316L from appearance alone?
No. Both appearance and finish are insufficient to identify or select a grade. State the service environment and the grade required by your project specification. Request the relevant material documents and traceability for the supplied sheet or plate.
How are minimum order and lead time confirmed?
Send your grade, size, tonnage and required delivery date. Ask for separate confirmation of stock availability, any production or processing time, and the dispatch date. Transit time depends on destination and shipment terms; the agreed quotation should state the minimum quantity and schedule.
What documents should I request?
List the required material test report, inspection document type and any third-party inspection in your enquiry. Ask which documents apply to your selected material and agree their scope before ordering. A general company certificate does not replace the material test results for the supplied heat or coil.
Related products
Stainless steel coil
Stainless steel coil for slitting, formed components, equipment panels and continuous processing. Select the grade, dimensions, finish and inspection…
View specifications
Hot rolled steel plate
Flat plate for structural fabrication and industrial components. Specify the grade, thickness and cutting dimensions for your application.
View specifications
Hot rolled steel coil
Coiled hot rolled steel for further processing, forming and fabrication. Share your target grade, width, thickness and coil requirements.
View specifications