Product reference photographs. Confirm grade, finish and supply specification with your enquiry.
Color coated plate & coil
PVDF color coated steel coil
PVDF coated galvanized coil enquiries for architectural finishes. Agree the paint system, color approval, gloss and substrate specification before ordering.
- Product form
- Coil
- Surface / finish
- Prepainted galvanized steel
- Grade / standard
- Galvanized steel substrate; base grade to order
Product details
PVDF coated galvanized coil enquiries for architectural finishes. Agree the paint system, color approval, gloss and substrate specification before ordering.
This specification is available for enquiry. Supply scope, dimensions and lead time must be confirmed with our team before ordering.
Color reference
Provide a color reference and agree how the finish will be approved.
Coating system
Specify the substrate, paint system and top and reverse coatings.
Profile & protection
Consider the forming process, protective film and packing together.
Typical application
Roofing & cladding
Color coated material for roofing, cladding and formed building products.
Explore applicationsProduct specifications
| Product form | Coil |
|---|---|
| Grade / standard | Galvanized steel substrate; base grade to order |
| Thickness | 0.13–0.8 mm |
| Width | 600–1,250 mm |
| Substrate | Galvanized steel |
| Paint system | PVDF (polyvinylidene fluoride) |
| Top paint thickness | 10–30 μm |
| Back paint thickness | 5–25 μm |
| Color | RAL color reference or custom color |
| Application | Roofing, cladding and formed building components |
| Coil configuration | Coil weight and inner diameter to order |
| Dimensional tolerances | To the agreed grade, standard and order specification |
| Order quantity & availability | Confirmed for the selected specification in the quotation |
| Edge condition | Mill edge or trimmed edge, confirmed with the order |
| Inspection document | Request heat / coil identification and material test results |
| Packaging | Moisture protection, steel strapping and agreed edge protection |
| Dispatch documents | Packing list and product identification matched to the order |
Ranges vary with grade, finish and order specification. Confirm the required dimensions, coating and availability in your quotation.
Paint systems and coating structure
| Item | Specification options |
|---|---|
| Substrate | Galvanized steel for PPGI; aluminium-zinc coated steel for PPGL |
| Primer | Epoxy, polyester, polyurethane or specified compatible primer |
| Topcoat resin | PE / SMP / HDP / PVDF, selected by exposure and forming |
| Topcoat thickness | 10–30 µm for coil reference range |
| Reverse coating | 5–25 µm for coil reference range |
| Color | RAL code or approved physical sample |
| Appearance | Gloss, texture, print pattern and protective film to approval |
| Testing | Dry film thickness, adhesion, T-bend, gloss and color difference as ordered |
Resin names do not define base-steel chemistry or a universal service-life guarantee.
Zinc coating designations
| Designation | Minimum total mass, both sides (g/m²) | Basis |
|---|---|---|
| Z100 | 100 | Three-spot test |
| Z120 | 120 | Three-spot test |
| Z140 | 140 | Three-spot test |
| Z180 | 180 | Three-spot test |
| Z200 | 200 | Three-spot test |
| Z225 | 225 | Three-spot test |
| Z275 | 275 | Three-spot test |
Coating mass is separate from base-steel grade; Z275 is not a strength grade. Do not treat ASTM G90 and EN Z275 as identical acceptance specifications.
Coating order specification
| Item | Selection |
|---|---|
| Primer options | Epoxy, polyester, water-soluble acrylic or polyurethane |
| Color specification | RAL reference or approved color sample |
| Steel substrate | Select base-steel grade independently of the paint resin |
| Coating layers | Specify metallic coating, primer, topcoat and reverse coating separately |
Coating test results and exposure guarantees depend on the selected paint system and order; no universal salt-spray life is implied.
Grade-specific technical data
Select a grade to view its composition, mechanical properties and applicable test conditions.
DX51D+Z substrate option
Steel substrate: DX51D+Z — chemical composition
| Element | Maximum / range (% by mass) |
|---|---|
| C | ≤0.180 |
| Mn | ≤1.20 |
| P | ≤0.120 |
| S | ≤0.045 |
| Si | ≤0.50 |
| Ti | ≤0.300 |
Heat analysis limits; the ordered standard edition and grade take precedence. Applies only when this substrate grade is ordered; the organic coating does not define the steel strength.
Steel substrate: DX51D+Z — mechanical properties
| Thickness (mm) | Tensile strength Rm (MPa) | Elongation A80 min. (%) |
|---|---|---|
| 0.20–0.35 | 270–500 | 15 |
| >0.35–0.50 | 270–500 | 18 |
| >0.50–0.70 | 270–500 | 20 |
| >0.70–6.00 | 270–500 | 22 |
Transverse specimens. No minimum yield strength is specified for DX51D in this table. Confirm the test timing and ordered standard. Applies only when this substrate grade is ordered; the organic coating does not define the steel strength.
DX52D+Z substrate option
Steel substrate: DX52D+Z — chemical composition
| Element | Maximum / range (% by mass) |
|---|---|
| C | ≤0.120 |
| Mn | ≤0.60 |
| P | ≤0.100 |
| S | ≤0.045 |
| Si | ≤0.50 |
| Ti | ≤0.300 |
Heat analysis limits; the ordered standard edition and grade take precedence. Applies only when this substrate grade is ordered; the organic coating does not define the steel strength.
Steel substrate: DX52D+Z — mechanical properties
| Thickness (mm) | Yield strength Re (MPa) | Tensile strength Rm (MPa) | Elongation A80 min. (%) |
|---|---|---|---|
| 0.30–0.50 | 140–300 | 270–420 | 22 |
| >0.50–0.70 | 140–300 | 270–420 | 24 |
| >0.70–6.00 | 140–300 | 270–420 | 26 |
Transverse specimens. Yield range applies to skin-passed surface qualities B/C. Mechanical-property time limits must be agreed. Applies only when this substrate grade is ordered; the organic coating does not define the steel strength.
Surface & processing requirements
Include the downstream process in your enquiry so that the material, dimensions and surface can be reviewed together.
| Slitting requirements | Target strip width, edge condition and winding arrangement. |
|---|---|
| Forming / fabrication | Describe the downstream forming, pressing, profiling or fabrication operation. |
| Color & coating approval | Provide the color reference, required gloss and paint system; agree the approval procedure. |
| Coil handling | Confirm lifting, uncoiling and storage constraints. |
Production & processing
Define the material and the downstream process together. Cutting, slitting or finishing requirements should form part of the order specification.
Material review
Grade, dimensions and surface requirements are checked against the enquiry.
Processing scope
Agree cutting, slitting or forming requirements and the finished product tolerances.
Order inspection
Define acceptance criteria, identification and the requested documentation.
Stock & warehouse
Hot rolled, galvanized and color coated material in warehouse settings. Ask our team to confirm current availability for your grade, dimensions and quantity.
Quality inspection & documentation
Agree the acceptance criteria and required documents before confirming your order.
- Material identificationGrade, standard and requested test documentation.
- Dimensions & surfaceThickness, width, finish and agreed tolerances.
- Order documentsProduct identification, packing list and inspection scope.
Packaging & shipment
Tell us how the material will be transported, unloaded and stored. Specify moisture protection, edge protection, package weight and destination with your enquiry.
| Protection | Moisture barrier, edge protection and surface protection as agreed. |
|---|---|
| Unit weight | Specify the coil or bundle weight for your unloading equipment. |
| Identification | Product, grade, dimensions and order reference on the agreed packing list. |
| Delivery | Confirm destination, transport method and delivery terms in the quotation. |
Certificates & verification documents
Request the original document issued for the supplying company, product scope and order. Material test reports and conformity documents are checked against the named holder, issuing body and validity period.
| Material test report | Heat or coil number, ordered grade, chemical composition and mechanical test results. |
|---|---|
| Inspection document | Specify the required EN 10204 document type and inspection scope in the enquiry. |
| Conformity documents | Request an original copy showing the issuing body, holder, number, applicable scope and validity. |
Frequently asked questions
What should I include in my enquiry?
Send the product, grade or standard, dimensions, quantity, required finish and destination. Describe the end use if the specification is still being developed.
Can I request a particular size or finish?
Yes, include your required size and finish in the enquiry. Availability and any processing requirements must be confirmed in the quotation.
How are minimum order and lead time confirmed?
They depend on grade, dimensions, processing and quantity. We confirm them for the particular order rather than publish one figure for every product.
What documents should I request?
State the material test document, inspection scope and other purchasing documents required for your project. Agree these with the order.
Related products
PPGI color coated steel coil
Prepainted galvanized steel coil with color and coating system selected for the intended use. Share the application environment and…
View specifications
PE polyester PPGI steel coil
Polyester coated galvanized coil enquiries. Specify the color reference, gloss, substrate, metallic coating and paint film requirements for review.
View specifications
SMP color coated steel coil
Silicone modified polyester coated coil enquiries. Share the exposure environment and required coating specification alongside the forming requirements.
View specifications